NVR & DVR General Guides (Setup, Password Reset etc....)
Viper Format Hard Drive
How to format a hard drive on the Viper system.
- Open full guide in Scribe View →
1. Click start and login.
2. Click start again and Settings.
3. Select Motion under "Camera"
4. Under the enable collumn, switch the drop down to "On" for each camera requiring motion, then select apply (bottom right).
Note. By default, motion alerts are turned on for Superlive plus and the recorder will record motion.
How to Factory Reset a Viper Recorder
This guide provides instructions for performing a factory reset on a Viper recorder, restoring the recorder to its original settings.
- Open full guide in Scribe View →
Viper Playback and Backup
How to play back recorded footage and back up video from a Viper recorder.
- Open full guide in Scribe View →
Viper Getting Online
How to get your Viper recorder connected and accessible online.
- Open full guide in Scribe View →
When adding multiple IP cameras to NVR and the bandwidth is exceeded (preventing you from adding more)
1. Login to NVR, select Settings > Recording, Schedule Recording & Event Recording, both bitrate need to be lowered. (lower to 2048Kbps on each camera).